福爾斯特FDM6053玻璃直線多級邊磨邊機（14磨頭） 機器簡介 1．該機用于平板玻璃直線平底邊、多級邊和棱邊的磨削、拋光。2．傳送帶采用滾動軸承結構，每件夾板分別安裝我公司為機器專門定制的3種型號共5個軸承，分別為承重軸承，導向軸承和扣簧軸承，使玻璃加工時摩擦力小，傳送更加平穩。使玻璃加工時摩擦力小，傳送更加平穩。可在本機上自磨后傳送板，使之長久保持高精度。分別裝有自動和手動的供油系統，能使整機保持在良好的潤滑條件下工作，運行更加穩定。3．電氣控制系統采用高端進口電氣元件，運用PLC進行手動和制動控制，人機界面可顯示被加工玻璃的厚度、斜邊角度、斜邊寬度及底邊的剩余厚度等參數。可在手動、自動兩種狀態下一次性加工完底邊與級邊的磨削。 1. The machine used for flat glass linear flat base, multilevel edge and the edge grinding, polishing.2. The conveyor belt rolling bearing structure, per piece splint separately install 3 types altogether 5 bearings which our company specially custom-bulit for this machine.To make glass process friction small, sending more smoothly. But on the unit after the grinding transfer board, to keep the high precision. To be equipped with automatic and manual respectively the injection system, can make the machine keep in good lubrication condition, operating more stable.3. The electrical control system adopts the high import electrical components; the use of PLC for manual and braking control, man-machine interface can display the thickness of the glass processing, beveling Angle, beveling width and thickness of bottom remaining parameters. But in the manual, automatic two kinds of condition the bottom level and one-time processing the edge of grinding. 該機型是當今較實用的藝術玻璃深加工設備   主要技術參數 速度范圍Speed range  ------------------------------0.4 - 6 m/min     斜邊角度Beveling angle  -----------------------------20°-70°   底邊較大磨削量Max bottom grinding-------------3 mm     棱角較大磨削寬度 Max edge width grinding------30 mm     加工較小玻璃尺寸Min glass size ------------------50 * 50 mm     加工玻璃厚度 Glass width---------------------------3-25 mm     總功率Total power-------------------------------------34 Kw 設備尺寸 Unit size------------------------------------8.25*1.5*2.75 M (L*W*H)     總重量 Total weight-----------------------------------7500 Kg