巨箭PC（聚碳酸酯）單組分膠粘劑 g-933  致力于特殊產品描述g-933 PC JUKAM Jujian膠系統采用專用樹脂。PC、PS、HIPS、粘接ABS，PVC，PMMA，GP，作為和其他硬膠粘貼或相互粘連，經室溫自然固化，定位時間快，固化后的膠粘劑，完全的不發白、防水、防腐、防銹性能。 Committed to special product description g-933 PC JUKAM Jujian Adhesive system uses special resin. PC, PS, HIPS, bonding ABS, PVC, PMMA, GP, as and other hard glue paste or mutual adhesion, the room temperature natural curing, positioning time fast, curing adhesive, completely not white, waterproof, corrosion , Excellent anti-rust performance. 三，操作說明：靠前步：表面處理，首先要去除材料表面的油或灰塵。第二步：上膠、上膠應均勻厚度、到位，不留粘合盲區。第三步：膠水快速粘合后立即加壓，使兩側緊密貼合！ Third, the operating instructions: The first step: surface treatment, first of all to remove the material surface of the oil or dust. The second step: glue, glue should be uniform thickness, in place, leaving no bonding blind spot. The third step: glue immediately after the rapid bonding pressure, so that both sides close fit! 第四步：g-933l膠適用于針筒、粘合透明PC塑料，沒有白色霧狀，沒有痕跡，定位快速（3-6秒定位），30分鐘左右具有撕裂材質效果 The fourth step: g-933l glue for syringes, adhesive transparent PC plastic, no white mist, no traces, positioning fast (3-6 seconds positioning), 30 minutes or so with tear material effect g-933m膠貼合后，約10-15分鐘定位，24小時后測試強度 G-933m glue after bonding, about 10-15 minutes positioning, 24 hours after the test strength g-933h膠貼合后，約30-45分鐘定位，24小時完全固化！ G-933h glue after bonding, about 30-45 minutes positioning, 24 hours fully cured! 四、包裝90ml /支，1公斤/桶，4公斤/桶，15公斤/桶， Four, packaging90ml / support, 1 kg / barrel, 4 kg / barrel, 15 kg / barrel, 五、貯存和質量存放在陰涼干燥的地方！遠離火。放置在兒童接觸不到的地方!在室溫下保質期為12個月。 Five, storage and qualityStore in a cool dry place! Away from fire Placed in children not reach the place! At room temperature shelf life of 12 months.