“美氏M6478”中性硅酮密封膠是一種中性固化的高性能密封膠:1)不腐蝕基材; 2)固化收縮率低; 3)在低溫(-45℃)至高溫(+164℃)內保持彈性;4)柔軟抗震,耐變形; 5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封：6）在鉛、鎘等六項有害物質的含量上達到了ROHS指令的要求，可以在歐盟范圍內進行銷售。說明:1)施工溫度在5℃~40℃之間;2)用兩塊布法清潔基材;3)將膠嘴按需要的大小做45°切斷;4)將膠打滿接縫處。重要:1)使用前請做材料相容性測試;2)不用于結構性裝配或表面溫度(45℃)以上的材料;3)不用于滲出油污或溶劑的材料。注意:遠離兒童!避免接觸眼睛和皮膚!如有接觸,請用水沖洗;仍然不適的請就醫檢查。執行標準:GB/T14683-2003保質期:9個月(<24℃). “MEISHI M6478”neutral silicone sealant is a neutral cure high perfomance grade silicone sealant: 1)Not corrosion to the materials; 2)Low shrinkage on curing; 3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation; 5)Suitable for glass,aluminum material,stone,concrete, brick, ceramic, plastic, non-structural bonding and sealing；6）In the lead, cadmium and other hazardous substances six reached the ROHS directive, can be sold within the EU DIRECTIONS:1)Construcation applycable between 5℃~40℃;2)Substrates should be solvent cleaned using two clothes method;3)Cut the nozzle to desired opening at 45°angle;4)Fill the joint completely.IMPORTANT:1)Please do material compatibility testing before use;2)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;3)Incompatible oozing out oily or solvents.PRECAUTIONS:Keep out of the reach of children!Avoid contact with eyes and skin!In case of contact,flush with lot water;If still indisposed,consult a doctor.STANDARS: GB/T14683-2003STORAGE: 9 Months(<24℃).