一、 設備用途： 該設備的設計比較適合玻璃深加工廠家；可生產高檔豪華連體或分體洗手盆；可進行循環加工生產，大大提高了生產率。其特點是：模具制作簡單，轉型快，用電量小，效率高。 二、 原理、結構簡介： 1．該設備的工作原理是：將模具擺好，放好玻璃，進入加溫區，當爐內溫度達到一定的溫度使玻璃能夠成型時，將爐體連同玻璃推去保溫爐去保溫，即得到一爐熱熔玻璃的成品。 2．該設備可進行全自動操作,分為上下結構；分裝缷區、升溫控區和保溫區三個部分，爐體采用鋼結構，爐內使用高檔保溫棉保溫。控制方式為：可編程全自動溫控儀操作。（可曲線升溫控制溫度）有恒溫功能。加溫是采用高檔石英管加熱，熱量高，壽命長。 三、 規格、技術參數： 1．加工玻璃厚度：12mm—19mm。 2．本機功率分為：52KW 3．設備外形尺寸： 長2650mm*寬2200mm*高1400mm 4．生產速度： 連體盆4個/1.5小時每爐 普通分體盆6個/1.5小時每爐 5．每臺配備副爐則可進行循環生產，提高生產率。副爐爐內尺寸與主爐尺寸一樣。 Pow elevated glass opaque washbasin melting furnace   Machine’s Use: The design of the equipment is more suitable for the glass deep processing factories;  it can produce connective and separate washbasins; It works circularly  The characteristics are: mold making simple, rapid transformation, with a small power consumption, high efficiency   Principle   Put glass on the mold,then put them into the furnace body,when heated to the appropriate temperature that the glass can form.push the furnace body to the cooling zone.When cooled will,that is a finished producet.   structure Introduction   The machine can be operated automaticlly,It’s made up by the up top and the bottom construction. It has three parts: Loaded unloaded area, temperature-controlled areas and holding area. The furnace body is made from steel.,Inside the furnace use high-grade cotton and fiber insulation ,to form a double protection.The temperature is  controlled intelligently by PID controller. Heating pipe materials is high-grade quartz. Specifications and technical parameter: Specifications, technical parameter: 1. Glass Thickness: 12mm-19mm. 2.Power: 52KW 3. Equipment Dimensions: length 2650mm * width 2200mm * High 1400mm 4. Production speed: connective basin 4 / 1.5 hours per ordinary separate basin 6 / 1.5 hours per furnace 5. The production will be improved,if add a Vice-furnace,the Vice-furnace furnace size and dimensions as the main furnace.